Articles in "2D Capturing" Category

14 article(s) found in this category.
  • Where Can I find Scatter and Regulatory reports?

    Regulatory documents can be found by choosing the product name below that matches your unit.       The following types of documents can be found are: X-Ray Dose & DAP Reports Scatter report & Leakage Reports Accaptance reports by model. Pax-i SeriesPax-i Paxi-3D Pax-i InsightPax-i3D SmartPax-i3D Smart RCPax-i3D...

    CONTINUE READING
  • Can I twain special features like Auto Pan and Insight Pano into 3rd party IMS software?

    Auto Pano & Insight Pano are special native functions that require the use of EzDent-i for full functionality. These special modalites are not able to capture and save into twain* 3rd party software. Vatech Recommends that you twain only Stardard 2D Pano/Ceph images into 3rd party IMS software. All other modes including Auto Pano and Insig...

    CONTINUE READING
  • Tracker is not recognizing the twain driver.

    First, make sure ALL twain settings are correct: Correct patientinfo.ini path and info Linkinfo.ini has the correct paths VATWAIN is configured properly (if used)Environment.ini and environment_twain.ini (if used)Second, test using TwackerTo set up twain to work within Tracker, you must select the Twain Device CMD option when trying to acquire. To ...

    CONTINUE READING
  • Datagrabber & SDK integration Compatibility for Vatech Software

    Datagrabber & SDK integration Compatibility for Vatech Software - The following chart to be used to identify Dattagrabber Functionality for Practice Management Software Bridging to EzDent-i / Easydent4 Direct SDK from Practice Management to EzDent-i/Easydent4 Twain for 2D & IntraOral HD Sensors.Note: Not all programs capable of twaining are...

    CONTINUE READING
  • Can we use a Laptop or All-in ONE PC as a Capture PC for our Pax-i?

    Vatech does not support the use of Laptop's or All-in One PC's as thier primary capture pc for our 2D X-Ray units.Laptop's and All in one PC's do not allow the proper expansion for the required secondary NIC card to make the connection to the device for stability. They also offer very limited performance due to their compact size an...

    CONTINUE READING
  • Preventive Maintenance & Regulatory Requirement Schedule

    Vatech Recommends your dealer technician access the following link to download the general PM schedule. Preventive Maintenance Schedule.PDF

    CONTINUE READING
  • 'Unsaved files exists' message / How to resend failed to save captured image using VTFileManagerAgent

    In the even that VTFileManager is not running at the time of saving and fails; you might get a balloon message that VTFilemanager does not work; and also unsaved images exist.Once you have solved the VTFilemanager connection issue you can follow the next steps to re-send the image for saving. If not please see -  Locate the task tray located n...

    CONTINUE READING
  • NCSW - Error E011, Error 11, Error 30 or empty box with Red X

    When trying to take images 2d Panoramic/Ceph or 3D CT images - Capture program produces "Error Code 11" or "Error Code 30" as shown below. In some cases you might get a blank empty box appear having only image of a Red XError [Code:11] / Error [Code:30] will also appear as shown below  In some cases; an Empty Box - Hav...

    CONTINUE READING
  • How to recover captured image that was not saved?

    Please note the following procedure applies to All Pax-i, Paxi3D, Paxi3D Green , Smart3D  units and some other  P1 Equipped units that use "NCSW" (New Capture Soft Ware) as show below in the screen shots.The procedure for re-saving for all modalities; Pano, Ceph, CT are all basically the same except the mode we pick, also if you...

    CONTINUE READING
  • My Xray machine will not turn or power on.

    The most common mistake is the emergency stop switch, locate the emergency stop switch located typically under the "Handle frame" this is the part of the arm that sticks out for patient to hold onto and supports the chin rest.Rotate the switch in the direction indicated by the arrows; if engaged typically it will be lite up 'red' ...

    CONTINUE READING