Articles in "EzRay Air Portable" Category

5 article(s) found in this category.
  • EzRay Air Portable: A08 Message or No Exposure.

    In some cases the EzRay might produce A08, if the trigger switch is not being pressed long enough. If the button is not being held long, if the button is briefly pressed  the unit will produce A08 to avoid 'accidental' exposures. You will want to press and hold the exposure switch until the unit 'beeps' and the control pannel i...

    CONTINUE READING
  • Power: How to check power on EzRay Air wallmount units

    Neutral to ground voltageAny potential measured between the neutral (white) conductor and safety ground (green or conduit) conductor of a building electrical system. For further information on Neutral to ground noise / voltage you can read the following Causes and Cures publication here. By Powervar - an Amtek company. Any noise or voltage between ...

    CONTINUE READING
  • EzRay Air Portable: Exposure Time Table

    EzRay Air Portable Exposure Time table:

    CONTINUE READING
  • EzRay Air Portable: How to Charge battery & 3rd party chargers

    Always use the provided authentic Vatech battery charger.  Please only use the charger that is provided in the EzRay Air P product Box Please do not attempt to use 3rd party chargers. Doing so may result in device damage and battery issue. Please remember to always disconnect the device rom the charger prior to use. If Alarm A.11 error code ma...

    CONTINUE READING
  • EzRay Air Portable Alarm Code

    EzRay Air Portable Alarm Code Troubleshooting Guide  EzRay Air Portable has self-diagnostic technology and perform self-diagnosis by monitoring internal signals for evidence of faults. Please follow instructions below.   

    CONTINUE READING