Articles for "EzDent-i"

24 article(s) found for this tag.
  • How to Activate / Deactivate EzDent-i & Ez3D-i License

    Activation Process: 1. Before you begin you should have received a key list, typically this is located on the installation USB drive or Provided to you through order request, email and so on.Example Key List: Note: for 3D Users you will also have keys for Ez3D-i typically found in the same file. 2. Open the software that you are needing to update e...

    CONTINUE READING
  • How to setup EzDenti to link to Mesh data mixers such as Mesh Mixer software.

    Before linking Mesh Mixer software in EzDent-i your IT or support of Mesh Mixer should install the program first before proceeding and confirm the software works normally. First access the EzDent-i menu by Clicking the EzDenti logo in the upper left hand corner, and click on Settings from the drop down menuClick on the Linkage/Email tab U...

    CONTINUE READING
  • EZDenti-i: How to hide the patient information while viewing chart

    EZDenti-i: How to hide the patient information while viewing chartWhile you are looking at a patient chart it might be nessacary to hide the patient information on the screen due to unsecure location that is visible by others outside of clinical staff and the patient.While viewing a chart you can at any time click the hide patient information butto...

    CONTINUE READING
  • EZDenti-i: How to change or auto hide the default patient list view

    How to change or auto hide the default patient list when opening EZDent-iEZDent-i has built in features that allow the end users to change the way it handles the patient listing. Access these options by opening the EZDent-i settings clicking the 'EzDenti' logo in the upper left hand corner. Select 'Settings' to open the user setting...

    CONTINUE READING
  • How to Configure EZDent-i Database & FileServer Settings

    Ensure the Database and File Server typically located on Capture PC or Main Office Server is running and accessible first. Verify the IP address of where the installation is located.1. Click in the upper left hand corner the "EzDent-i" logo, from the drop down choose 'Settings' 2. On The General tab, if the selection is set t...

    CONTINUE READING
  • EzDent-i/Ez3D-i: Failed to register

    Typically the Windows or network firewall might sometimes block the registration, normally turning off or disabling the firewall should allow the registration to proceed; in the event the firewall is not able to turn off, Please have your IT or Network admin contact Vatech support to add exception to the host file.  

    CONTINUE READING
  • How do I get the Open Dental Bridge working with Easydent4 or EzDenti?

    OpenDental supports bridging to both Easydent4 as well as EzDent-i. Please consult with your qualified IT consultant or OpenDental support,. the following guide is provided as a reference only and subject to change with out notice. Open - OpenDental software - be sure you are logged in as an administrator account. In the main menu, click Setup,&nbs...

    CONTINUE READING
  • Datagrabber & SDK integration Compatibility for Vatech Software

    Datagrabber & SDK integration Compatibility for Vatech Software - The following chart to be used to identify Dattagrabber Functionality for Practice Management Software Bridging to EzDent-i / Easydent4 Direct SDK from Practice Management to EzDent-i/Easydent4 Twain for 2D & IntraOral HD Sensors.Note: Not all programs capable of twaining are...

    CONTINUE READING
  • Practice Management bridging to EzDenti- linkage.xml message when bridging information from 3rd party

    Practice Management bridging to EzDenti- linkage.xml message when bridging information from 3rd party is typically caused by lack of certain key patient information.First you will want to try a known good patient that has been previously passed and verify operation of the bridge it self, if it still failes then check that you can manually open EzDe...

    CONTINUE READING
  • Preperation for sucessful migration or conversion of our Easydent4/EzDenti Database?

    In the event that migration from one PC to another PC (Or server) in case of changing PC's, due to upgrade or replacment -or- in preperation of migration from Easydent4 to EzDenti it is first important that a final backup is conducted right before the upgrade or migration occurs to ensure a good working backup copy before anything is moved or c...

    CONTINUE READING